Armored Cable

*Product images are for illustrative purposes only and may differ from the actual product.

2.4kV - AIA - UL Type MV-90

Part #: Y70203A

Aluminum Interlocked Armor
EPR Insulation - Non-Shielded
90°C - 2.4kV - UL Type MV-92

x

Please select all above options before adding to cart.
Construction
Category Conductor Description Bare copper, compact class B strand
Extruded Strand Shield Extruded thermoset semi-conducting stress control layer over conductor
Category Insulation Description Ethylene Propylene rubber colored to contrast with black conducting shield layer
Spec Ground Annealed bare copper Class B stranding per ASTM B8
Armor Aluminum Interlocker armor
Category Jacket Description Flame-retardant, moisture, and sunlight resistant Polyvinyl Chloride (PVC)
  • Ideally suited for use in a broad range of commercial, industrial and utility applications where reliability is the major concern, maximum performance will be demanded, space is limited, and fire resistance is necessary
  • May be installed in wet or dry locations, indoors or outdoors and in exposed or concealed work
  • May be used in cable trays or on approved supports in protected areas
  • ICEA S-96-659
  • NEMA WC-71
  • UL 1072
  • UL 1569
  • IEEE 1202 available upon request
  • UL 1581
  • ICEA T-29-520
  • ICEA T-30-520
  • EPA 40 CFR part 261
  • OSHA Acceptable

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Conductors Ground Gauge Conductor Diameter Insulation Thickness Jacket Thickness Nominal OD over Armor Material Weight (Lbs./M')
Y70603A 6 3 6 .170" 0.115 0.05 1.16 854
Y70403A 4 3 6 .210" 0.115 0.05 1.26 1056
Y70203A 2 3 6 .270" 0.115 0.05 1.37 1335
Y71/003A 1/0 3 4 .340" 0.115 0.06 1.61 2003
Y72/003A 2/0 3 4 .380" 0.115 0.06 1.71 2326
Y74/003A 4/0 3 3 .480" 0.115 0.06 1.92 3211
Y725003A 250 3 3 .520" 0.115 0.06 2.00 3689
Y735003A 350 3 2 .620" 0.115 0.06 2.21 4835
Y750003A 500 3 1 .740" 0.115 0.075 2.46 6547
Y775003A 750 3 1/0 .910" 0.115 0.075 2.83 9320

Note: The data shown are approximate and subect to standard industry and manufacturer tolerances