Tray Cable

*Product images are for illustrative purposes only and may differ from the actual product.

SDN - Small Diameter Neoprene - 16 AWG

Small Diameter Control
Reel and Pendant
SDN - UL Type TC 90°C - 600 Volt

x

Please select all above options before adding to cart.
Construction
Category Conductor Description Bare, soft annealed copper per ASTM B-3 16 AWG (19 strand)
Category Insulation Description Each conductor is concentrically insulated with a 15 mil wall of high dielectric flame retardant polymer (HDPE) with 5 mil wall of clear polymide (nylon) jacket extruded over primary insulation and conforming to UL requirements
  • To be installed in trays, raceways, troughs, channels, ducts, conduit, and by direct burial.
  • Recommended for wet or dry locations and outdoors in cable trays where a sunlight resistant rating is required.
  • Designed for control, power, lighting, telemetering, signal, relay traffic control, wherever flexible, small diameter cable is required such as cranes, hoists, and some robotics applications.
  • OSHA acceptable
  • Recognized for use in Class 1 or 2, Division 2 hazardous locations
  • UL Type power and control tray cables and Articles 318, 340, 500, and 501 of the NEC
  • Cables pass UL 1277
  • Cables are rated as Type TC, 600 volts, 90°C
  • Rated for UV/Sunlight Resistant applications

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Conductors Jacket Thickness Outside Diameter Inches Material Weight (Lbs./M')
AS11660 16 60 0.08 1.05 953
AS11637 16 37 0.08 0.87 498
AS11630 16 30 0.06 0.75 396
AS11625 16 25 0.06 0.73 380
AS11624 16 24 0.06 0.715 323
AS11621 16 21 0.06 0.65 340
AS11619 16 19 0.06 0.63 296
AS11618 16 18 0.06 0.63 290
AS11617 16 17 0.06 0.63 290
AS11616 16 16 0.06 0.585 254
AS11615 16 15 0.06 0.59 255
AS11614 16 14 0.06 0.555 205
AS11613 16 13 0.06 0.555 225
AS11612 16 12 0.045 0.5 165
AS11611 16 11 0.045 0.5 180
AS11610 16 10 0.045 0.485 144
AS11609 16 9 0.045 0.475 128
AS11608 16 8 0.045 0.45 115
AS11607 16 7 0.045 0.415 123
AS11606 16 6 0.045 0.39 94
AS11605 16 5 0.045 0.36 89
AS11604 16 4 0.045 0.33 73
AS11603 16 3 0.045 0.305 61
AS11602 16 2 0.045 0.295 51

Note: The data shown are approximate and subject to standard industry and manufacturer tolerances.