Tray Cable

*Product images are for illustrative purposes only and may differ from the actual product.

SDN - Small Diameter Neoprene - 12 AWG

Small Diameter Control
SDN - UL Type TC
90°C - 600 Volt

Construction
Category Conductor Description Bare, soft annealed copper per ASTM B-3 12 AWG (19 strand)
Category Insulation Description Each conductor is concentrically insulated with a 15 mil wall of high dielectric flame retardant polymer (HDPE) with 5 mil wall of clear polymide (nylon) jacket extruded over primary insulation and conforming to UL requirements
  • To be installed in trays, raceways, troughs, channels, ducts, conduit, and by direct burial Recommended for wet or dry locations and outdoors in cable trays where a sunlight resistant rating is required Designed for control, power, lighting, telemetering, signal, relay traffic control, wherever flexible, small diameter cable is required such as cranes, hoists, and some robotics applications
  • OSHA acceptable Recognized for use in Class 1 or 2, Division 2 hazardous locations UL Type power and control tray cables and Articles 318, 340, 500, and 501 of the NEC Cables pass UL 1277 Cables are rated as Type TC, 600 volts, 90°C

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Conductors Jacket Thickness Outside Diameter Inches Material Weight (Lbs./M')
AS11202 12 2 .045 .3650 109
AS11203 12 3 .045 .3800 113
AS11204 12 4 .045 .4150 156
AS11205 12 5 .045 .4500 186
AS11206 12 6 .045 .4900 206
AS11207 12 7 .045 .5700 230
AS11208 12 8 .060 .6100 294
AS11209 12 9 .060 .6500 325
AS11210 12 10 .060 .6650 350
AS11211 12 11 .060 .6850 375
AS11212 12 12 .060 .6850 395
AS11213 12 13 .060 .7000 430
AS11214 12 14 .060 .7200 455
AS11215 12 15 .060 .7550 480
AS11216 12 16 .060 .7550 505
AS11217 12 17 .060 .8000 530
AS11218 12 18 .060 .8000 555
AS11219 12 19 .080 .8000 605
AS11221 12 21 .080 .8800 680
AS11224 12 24 .080 .9700 773
AS11225 12 25 .080 .9700 782
AS11230 12 30 .080 1.030 1032
AS11237 12 37 .080 1.1500 1120

Note: The data shown are approximate and subject to standard industry and manufacturer tolerances.