TRAY CABLE Cable

Home > Tray Cable > PVC Nylon PVC 600V Control Type TC-ER > TRAY CABLE Cable
PVC/Nylon/PVC, 600V Control, Type TC-ER

*Product images are for illustrative purposes only and may differ from the actual product.

PVC/Nylon/PVC, 600V Control, Type TC-ER

Download Spec Sheet
Brochure

PVC/Nylon/PVC, 600V Control, Type TC-ER

PVC Jacket
PVC/Nylon Insulation
90°C - 600 Volt - UL Type TC-ER*
4 Conductor

Construction
Category Conductor Description Fully annealed bare copper Class B compressed strand
Category Insulation Description Polyvinyl Chloride (PVC) covered with nylon (THHN/THWN)
Filler Non-hygroscopic fillers, as necessary to obtain a circular cross section
Category Jacket Description Polyvinyl Chloride (PVC)
  • In conduit, duct, free air, raceways, and direct burial, primary installations include cable trays, and outdoor locations
  • In wet or dry locations
  • Approved for Class 1, Div. 2 industrial hazardous locations per NEC
  • Permitted for Exposed Run (ER) used in accordance with NEC for 3 or more conductors; two conductors without a ground wire are Type TC only
  • ASTM B8
  • ASTM B33
  • UL® 66
  • UL 83
  • UL 1277
  • UL 1685 (flame compliance)
  • ICEA S-95-658
  • ICEA S-73-532
  • NEC
  • EPA 40 CFR, Part 261
  • OSHA
  • RoHS-compliant/RoHS 2-compliant
  • REACH-compliant
  • Rated for UV/Sunlight Resistant applications

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Conductors Insulation Thickness Jacket Thickness Outside Diameter Inches Material Weight (Lbs./M')
A151404 14 4 0.02 0.045 0.365 100
A151204 12 4 0.02 0.045 0.42 138
A151004 10 4 0.02 0.045 0.505 209

Note: The data shown are approximate and subject to standard industry and manufacturer tolerances.