nVent CADDY Rod Lock Beam Clamp, Thick Flange, 1/2" Rod #CRLB50EG

Zoom In Zoom Out Enlarge

*Product images are for illustrative purposes only and may differ from the actual product.

Download Spec Sheet

Brochure

nVent CADDY Rod Lock Beam Clamp, Thick Flange, 1/2" Rod

Part #: CRLB50EG

Qty *

Please select all above options before adding to cart.

Construction Applications Standards Q&A

Construction
Category	CADDY ROD LOCK Structural Attachments
Category Description	nVent CADDY Rod Lock Beam Clamp, Thick Flange, 1/2" Rod, 0.375"-0.75" (9.5-20 mm) Flange
Category Features	• Prefabricated assemblies easily lift and lock into place, helping to save time and money • Easy “push-to-install” design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in position • Lock nut can be finger tightened, locking the rod in place • Works with slightly damaged threads and minor burrs on the threaded rod
Category Standards	• Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 19 and 23)
Material	Cast Iron
Flange	.375”– 0.75”
Rod Size	1/ 2"
Static Load	1100
Weight	86.100
Finish	Electrogalvanized

For use on plain and electro zinc plated hardware only. FM® Approved in the bottom mount orientation only.Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/2 turn added.

• Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 19 and 23)

Name

Question