35kV - Shielded, EPR/PVC, 133% Insulation Cable

*Product images are for illustrative purposes only and may differ from the actual product.

35kV - EPR Insulation, MV-105-133% Insulation Level

Part #: MVE525001

EPR Insulation - PVC Jacket
MV-105 - 35kV at 133% Insulation
Shielded - Single Conductor

Construction
Category Conductor Description Annealed bare copper Compact, Class B stranding
Extruded Strand Shield Extruded thermoset semi-conducting stress control layer over conductor
Category Insulation Description Ethylene Propylene Rubber (EPR), colored to contrast with the black conducting shield layers
Extruded Insulation Shield Thermoset semi-conducting polymeric layer free stripping from insulation
Metallic Shield 5 mils annealed copper tape with an overlap of 25%
Category Jacket Description Low friction, lead-free, flame-retardant, moisture, and sunlight resistant Polyvinyl Chloride (PVC)
  • Suitable for use in wet and dry locations when installed in accordance with NEC
  • For aerial, direct burial, conduit, open tray, and underground duct installations
  • For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4(A)(5)
  • National Electric Code (NEC)
  • UL 1072
  • UL listed as Type MV-105 for use in accordance with NEC
  • UL 1685
  • IEEE 1202
  • OSHA Acceptable

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Stranding Insulation Thickness Jacket Thickness Outside Diameter Inches Material Weight (Lbs./M')
MVE51/001 1/0 19 0.42 0.08 1.47 1328
MVE52/001 2/0 19 0.42 0.08 1.49 1378
MVE53/001 3/0 19 0.42 0.08 1.53 1532
MVE54/001 4/0 19 0.42 0.08 1.59 1804
MVE525001 250 37 0.42 0.08 1.64 1959
MVE535001 350 37 0.42 0.08 1.79 2396
MVE550001 500 37 0.42 0.11 1.91 3120
MVE575001 750 61 0.42 0.11 2.09 4109
MVE5100001 1000 61 0.42 0.11 2.25 4885

Note: The data shown is approximate and subject to standard industry and manufacturer tolerances