Medium Voltage

*Product images are for illustrative purposes only and may differ from the actual product.

25kV - EPR Insulation, MV-105-133% Insulation Level

Part #: MVE435001

EPR Insulation - PVC Jacket
MV-105 - 25kV at 133% Insulation
Shielded - Single Conductor

Construction
Category Conductor Description Annealed bare copper Compact, Class B stranding
Extruded Strand Shield Extruded thermoset semi-conducting stress control layer over conductor
Category Insulation Description Ethylene Propylene Rubber (EPR), colored to contrast with the black conducting shield layers
Extruded Insulation Shield Thermoset semi-conducting polymeric layer free stripping from insulation
Metallic Shield 5 mil annealed copper tape with an overlap of 25%
Category Jacket Description Low friction, lead-free, flame-retardant, moisture, and sunlight resistant Polyvinyl Chloride (PVC)
  • Suitable for use in wet and dry locations when installed in accordance with NEC
  • For aerial, direct burial, conduit, open tray, and underground duct installations
  • For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4(A)(5)
  • National Electric Code (NEC)
  • UL 1072
  • UL listed as Type MV-105 for use in accordance with NEC
  • UL 1685
  • IEEE 1202
  • OSHA Acceptable

Questions & Answers

Ask a Question

Part Number Table

Part # Houston Wire & Cable Gauge Stranding Insulation Thickness Jacket Thickness Nominal OD over Insulation Outside Diameter Inches Material Weight (Lbs./M')
MVE41/001 HW21110101 1/0 19 0.345 0.08 1.08 1.31 1086.4
MVE42/001 HW21120101 2/0 19 0.345 0.08 1.12 1.41 1304
MVE43/001 HW21130101 3/0 19 0.345 0.08 1.17 1.46 1461
MVE44/001 HW21140101 4/0 19 0.345 0.08 1.22 1.45 1531.3
MVE425001 HW21140101 250 37 0.345 0.08 1.28 1.57 1826
MVE435001 HW21135001 350 37 0.345 0.08 1.37 1.67 2235
MVE450001 HW211 50001 500 37 0.345 0.11 1.5 1.85 2934
MVE475001 HW21175001 750 61 0.345 0.11 1.68 2.06 3962
MVE4100001 HW21110001 1000 61 0.345 0.11 1.84 2.22 4917

Note: The data shown is approximate and subject to standard industry and manufacturer tolerances