25kV - EPR Insulation, MV-105-133% Insulation Level #MVE43/001

Zoom In Zoom Out Enlarge

*Product images are for illustrative purposes only and may differ from the actual product.

Download Spec Sheet

Houston Wire & Cable spec sheet

25kV - EPR Insulation, MV-105-133% Insulation Level

Part #: MVE43/001

EPR Insulation - PVC Jacket
MV-105 - 25kV at 133% Insulation
Shielded - Single Conductor

Construction Applications Standards Q&A

Construction
Category Conductor Description	Annealed bare copper Compact, Class B stranding
Extruded Strand Shield	Extruded thermoset semi-conducting stress control layer over conductor
Category Insulation Description	Ethylene Propylene Rubber (EPR), colored to contrast with the black conducting shield layers
Extruded Insulation Shield	Thermoset semi-conducting polymeric layer free stripping from insulation
Metallic Shield	5 mil annealed copper tape with an overlap of 25%
Category Jacket Description	Low friction, lead-free, flame-retardant, moisture, and sunlight resistant Polyvinyl Chloride (PVC)

Suitable for use in wet and dry locations when installed in accordance with NEC
For aerial, direct burial, conduit, open tray, and underground duct installations
For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4(A)(5)

Name

Question

Note: The data shown is approximate and subject to standard industry and manufacturer tolerances