Medium Voltage

*Product images are for illustrative purposes only and may differ from the actual product.

2.4kV - Nonshielded - EPR/PVC

Part #: MVE135001

EPR Insulation - PVC Jacket
2.4kV - MV-90 - Non-shielded

Construction
Category Conductor Description Compressed class B stranded tinned copper
Conductor Shield Nylon semi-conducting tape
Category Insulation Description 90°C rated Ethylene Propylene Rubber (EPR)
Category Jacket Description Extruded sunlight resistant Polyvinyl Chloride (PVC) jacket
  • UL listed
  • OSHA acceptable
  • Suitable for use in wet or dry locations at maximum operating temperature of 90°C for normal operation; 130°C for emergency overload conditions; and 250°C for short circuit conditions
  • May be installed in conduit, duct or aerially when properly supported by a messenger
  • ICEA S-96-659/NEMA WC 71
  • UL-1072
  • ASTM B3 and B8
  • RoHS Compliant

Questions & Answers

Ask a Question

Part Number Table

Part # Houston Wire & Cable Gauge Stranding Insulation Min Avg Wall(Mils) Nominal OD over Conductor Outside Diameter Inches Material Weight (Lbs./M')
MVE10401 - 4 7 0.125 .228 0.65 335
MVE10601 - 6 7 0.125 .181 0.605 231
MVE10201 2-012.4KVNSEP 2 7 0.125 .287 0.75 422
MVE11/001 1/0-012.4KVNSEP 1/0 19 0.125 .367 0.829 574
MVE12/001 2/0-012.4KVNSEP 2/0 19 0.125 .412 0.871 676
MVE14/001 4/0-012.4KVNSEP 4/0 19 0.125 .520 1.01 995
MVE125001 - 250 37 0.14 .566 1.127 1199
MVE135001 350-012.4KVNSEP 350 37 0.14 .670 1.229 1560
MVE150001 500-012.4KVNSEP 500 37 0.14 .800 1.357 2088
MVE175001 - 750 61 0.155 .983 1.55 2971

Note: The data shown are approximate and subject to standard industry and manufacturer tolerances