Single Conductor Medium Voltage Power Cable Cable #MVE5_1017

Zoom In Zoom Out Enlarge

*Product images are for illustrative purposes only and may differ from the actual product.

35kV - EPR Insulation, PVC Jacket

Single Conductor, EPR Insulation - PVC Jacket
35 kV, EPR/Copper Tape Shield
UL Type MV-105
133% Insulation Levels

Gauge

Construction Applications Standards Q&A

Construction
Category Conductor Description	1/0 AWG thru 1000 kcmil annealed bare copper compact Class B strand
Extruded Strand Shield	Extruded thermoset semi-conducting stress-control layer over conductor
Category Insulation Description	Lead-free Ethylene Propylene Rubber (EPR) insulation, contrasting in color to the black semi-conducting shield layers
Extruded Insulation Shield	Thermoset semi-conducting polymeric layer free stripping from insulation
Metallic Shield	5 mil annealed copper tape with an overlap of 25%
Category Jacket Description	Low-friction, lead-free, flame-retardant, moisture and sunlight-resistant Polyvinyl Chloride (PVC)

Superior performance in petrochemical plants, pulp and paper mills, sewage and water treatment plants, environmental protection systems, railroads, mines, utility power generating stations, steel mills, textile plants and other industrial three-phase applications
For use in wet or dry locations when installed in accordance with NEC
For use in aerial, conduit, open tray and underground duct installations
For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4(A)(5)

National Electrical Code (NEC)
UL 1072
ICEA S-93-639/NEMA
WC74
ICEA S-97-682
AEIC CS8
UL listed as Type MV-105 for use in accordance with NEC, UL File # E90501
IEEE 1202 (70,000 BTU/hr)/CSA FT4 EPA 40 CFR, Part 261 for leachable lead content per TCLP method
OSHA Acceptable
RoHS Compliant

Name

Question

Note: The data shown are approximate and subject to standard industry and manufacturer tolerances