24 AWG – 7×32 Stranded Tinned Copper - Low Cap. for RS-422

Home > Montrose > 24 AWG 7x32 Stranded Tinned Copper Low Cap for RS 422 > 24 AWG – 7×32 Stranded Tinned Copper - Low Cap. for RS-422
24 AWG – 7×32 Stranded Tinned Copper - Low Cap. for RS-422

*Product images are for illustrative purposes only and may differ from the actual product.

24 AWG – 7×32 Stranded Tinned Copper - Low Cap. for RS-422

Download Spec Sheet

24 AWG – 7×32 Stranded Tinned Copper - Low Cap. for RS-422

Part #: D62412

Paried - 300 Volt - 60°C
Individually Shielded
Low Capacitance for RS-425

Construction
Category Conductor Description Stranded tinned copper
Category Insulation Description Foam Polyethylene (FPE), twisted pairs
Shield Drain Individually shielded with aluminum/polyester shield with a stranded tinned copper drain wire
Category Jacket Description Gray, Polyvinyl Chloride (PVC)
  • Used for computers, communications, instrumentation, sound, control, audio, and data transmissions
  • Designed to protect signal integrity under critical conditions by reducing noise
  • Features include low dielectric constant and a dissipation factor for high speed, low distortion data handling
  • Physical properties include good crush resistance and light weight
  • NEC CM
  • CEC CM
  • Voltage: 300 Volt

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Pairs Stranding Outside Diameter Inches Nominal Capacitance A Nominal Capacitance B Material Weight (Lbs./M')
D62402 24 2 7x32 TC 0.304 12 23 34
D62403 24 3 7x32 TC 0.334 12 23 46
D62404 24 4 7x32 TC 0.363 12 23 55
D62406 24 6 7x32 TC 0.421 12 23 83
D62409 24 9 7x32 TC 0.488 12 23 111
D62411 24 11 7x32 TC 0.575 12.5 23.2 305
D62412 24 12 7x32 TC 0.575 12 23 154
D62415 24 15 7x32 TC 0.639 12 23 185
D62417 24 17 7x32 TC 0.671 12 23 209
D62419 24 19 7x32 TC 0.671 12 23 220
D62427 24 27 7x32 TC 0.797 12 23 328

A* Capacitance between conductors B** Capacitance between one conductor and other conductors connected to shield Note: The data shown is approximate and subject to standard industry and manufacturer tolerances