Montrose

Home > Montrose > 24 AWG 7x32 Stranded Tinned Copper Low Cap for RS 422 > 24 AWG – 7×32 Stranded Tinned Copper - Low Cap. for RS-422
24 AWG – 7×32 Stranded Tinned Copper - Low Cap. for RS-422

*Product images are for illustrative purposes only and may differ from the actual product.

24 AWG – 7×32 Stranded Tinned Copper - Low Cap. for RS-422

Download Spec Sheet

24 AWG – 7×32 Stranded Tinned Copper - Low Cap. for RS-422

Part #: D62409

Paried - 300 Volt - 60°C
Individually Shielded
Low Capacitance for RS-423

x

Please select all above options before adding to cart.

Construction
Category Conductor Description Stranded tinned copper
Category Insulation Description Foam Polyethylene (FPE), twisted pairs
Shield Drain Individually shielded with aluminum/polyester shield with a stranded tinned copper drain wire
Category Jacket Description Gray, Polyvinyl Chloride (PVC)
  • Used for computers, communications, instrumentation, sound, control, audio, and data transmissions
  • Designed to protect signal integrity under critical conditions by reducing noise
  • Features include low dielectric constant and a dissipation factor for high speed, low distortion data handling
  • Physical properties include good crush resistance and light weight
  • NEC CM
  • CEC CM
  • Voltage: 300 Volt

Questions & Answers

Ask a Question

Part Number Table

Part # Houston Wire & Cable Gauge Pairs Stranding Outside Diameter Inches Nominal Capacitance A Nominal Capacitance B Material Weight (Lbs./M')
D62402 HW9729 24 2 7x32 TC 0.304 12 23 34
D62403 - 24 3 7x32 TC 0.334 12 23 46
D62404 - 24 4 7x32 TC 0.363 12 23 55
D62406 - 24 6 7x32 TC 0.421 12 23 83
D62409 - 24 9 7x32 TC 0.488 12 23 111
D62411 - 24 11 7x32 TC 0.575 12.5 23.2 305
D62412 - 24 12 7x32 TC 0.575 12 23 154
D62415 - 24 15 7x32 TC 0.639 12 23 185
D62417 - 24 17 7x32 TC 0.671 12 23 209
D62419 - 24 19 7x32 TC 0.671 12 23 220
D62427 - 24 27 7x32 TC 0.797 12 23 328

A* Capacitance between conductors B** Capacitance between one conductor and other conductors connected to shield Note: The data shown is approximate and subject to standard industry and manufacturer tolerances