18 AWG – 16×30 Stranded Tinned Copper – 1 pair

Home > Montrose > 18 AWG 16x30 Stranded Tinned Copper 1 Pair > 18 AWG – 16×30 Stranded Tinned Copper – 1 pair
18 AWG – 16×30 Stranded Tinned Copper – 1 pair

*Product images are for illustrative purposes only and may differ from the actual product.

18 AWG – 16×30 Stranded Tinned Copper – 1 pair

Download Spec Sheet
Houston Wire & Cable spec sheet

18 AWG – 16×30 Stranded Tinned Copper – 1 pair

Part #: D11802

Multiconductor - 300 Volt
Overall Aluminum Shield
Polyethylene Insulation

Construction
Category Conductor Description Stranded tinned copper
Category Insulation Description Polyethylene (PE), twisted pair
Shield 100% aluminum foil/polyester with stranded tinned copper drain wire
Category Jacket Description Gray, Polyvinyl Chloride (PVC)
Temperature -20C to 75C
  • Paired cables allow balanced signal transmission which results in lower crosstalk through common mode rejection
  • Due to the improved noise immunity of twisted pairs, they generally permit higher data speeds than multi-conductor cables
  • CEC CM
  • NEC type CM
  • 300 Volt rated 60°C rated

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Pairs Stranding Insulation Thickness Jacket Thickness Outside Diameter Inches Material Weight (Lbs./M')
D11802 18 1 16x30 TC 0.019 0.028 0.202 21
D11802-BS 18 1 16x30 TC 0.019 0.028 0.23 36

Note: The data shown is approximate and subject to standard industry and manufacturer tolerances. *D11802-BS: The jacket and the shield are bonded so both can be removed on automatic striping equipment. Drain wire is on the inside of the foil shield. Also available in a pull box.