PVC/Nylon Insulation – PVC Jacket – 3 Conductor w/ Ground

Home > Tray Cable > PVC Nylon Insulation PVC Jacket 3 Conductor with Ground > PVC/Nylon Insulation – PVC Jacket – 3 Conductor w/ Ground
PVC/Nylon Insulation – PVC Jacket – 3 Conductor w/ Ground

*Product images are for illustrative purposes only and may differ from the actual product.

PVC/Nylon Insulation – PVC Jacket – 3 Conductor w/ Ground

Download Spec Sheet
Brochure

PVC/Nylon Insulation – PVC Jacket – 3 Conductor w/ Ground

Part #: A30303
x



Please select all above options before adding to cart.

  • General purpose cable for use in primary power and feeder circuits in a broad range of commercial and industrial applications. Approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous operation at 90°C in wet and dry locations, 105°C for emergency overload conditions, and 150°C for short circuit conditions.
  • • IEEE 383 (70,000 BTU/hr) Flame Test
  • • ICEA (210,000 BTU/hr) Flame Test
  • • UL Type TC per Article 336 of the NEC
  • • UL Type TC-ER Rated for Exposed Run

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Conductors Ground Gauge Insulation Thickness Jacket Thickness Outside Diameter Inches Material Weight (Lbs./M')
A31403 14 3 14 0.02 0.045 0.35 93
A31203 12 3 12 0.02 0.045 0.39 132
A31003 10 3 10 0.026 0.06 0.45 197
A30803 8 3 10 0.036 0.06 0.6 313
A30603 6 3 8 0.036 0.06 0.69 422
A30403 4 3 8 0.048 0.08 0.88 653
A30303 3 3 6 - - 0.92 784
A30203 2 3 6 0.048 0.08 1 968
A30103 1 3 6 0.059 0.08 1.11 1221
A31/003 1/ 0 3 6 0.059 0.08 1.23 1438
A32/003 2/ 0 3 6 0.059 0.08 1.32 1747
A33/003 3/ 0 3 4 0.059 0.08 1.41 2159
A34/003 4/ 0 3 4 0.059 0.08 1.55 2568
A325003 250 3 4 0.07 0.11 1.74 3094
A335003 350 3 3 0.07 0.11 1.99 4215
A350003 500 3 2 0.07 0.11 2.27 5850
A360003 600 3 2 0.08 0.11 2.44 7156
A375003 750 3 1 0.08 0.11 2.65 8609

Note: The data shown are approximate and subject to standard industry and manufacturer tolerances.