5kV/8kV - UNISHIELD?, EPR/CPE, 100% or 133% Cable

*Product images are for illustrative purposes only and may differ from the actual product.

5kV/8kV UNISHIELD - EPR Insulation, CPE Jacket

EPR Insulation - CPE Jacket
MV-105- 133% (5kV) or 100% (8kV)
Shielded - Single Conductor - 5kV and 8kV
UNISHIELD®

Construction
Category Conductor Description Annealed bare copper Anapact™ compact, Class B stranding
Extruded Strand Shield Extruded thermoset semiconducting stress control layer over conductor
Category Insulation Description Ethylene Propylene Rubber (EPR), colored to contrast with the black conducting shield layer
Composite Insulation Shield and Jacket Six corrugated copper drain wires embedded in an extruded black conducting flame-retardant Chlorinated Polyethylene (CPE) composite Insulation shield and jacket
  • Suitable for use in wet or dry locations when installed in accordance with NEC
  • Suitable for use in aerial, direct burial, conduit, open tray, and underground duct installations
  • For use in broad range of commercial, industrial, and utility projects
  • National Electric Code (NEC)
  • UL 1072
  • UL listed as Type MV-105 for use in accordance with NEC
  • UL 1685
  • IEEE 1202
  • OSHA Acceptable

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Stranding Insulation Thickness Jacket Thickness Nominal OD over Insulation Outside Diameter Inches Material Weight (Lbs./M')
MVU10201 2 7 0.115 0.075 .542 0.77 404
MVU11/001 1/0 19 0.115 0.075 .615 0.787 563
MVU12/001 2/0 19 0.115 0.08 .658 0.837 675
MVU14/001 4/0 19 0.115 0.08 .759 1.04 951
MVU125001 250 37 0.115 0.08 .813 1 1122
MVU135001 350 37 0.115 0.08 .909 1.11 1476
MVU150001 500 37 0.115 0.085 1.03 1.36 2003
MVU175001 750 61 0.115 0.085 1.22 1.48 2893
MVU1100001 1000 61 0.115 0.1 1.38 1.61 3786

Note: The data shown are approximate and subject to standard industry and manufacturer tolerances General Cable UniShield® is a registered trademark of General Cable