5kV - Nonshielded, XLP Cable

Home > Medium Voltage > 5kV Nonshielded XLP Insulation FAA L824 Type C > 5kV - Nonshielded, XLP Cable
5kV - Non-shielded - XLP Insulation - FAA L824 Type C

*Product images are for illustrative purposes only and may differ from the actual product.

5kV - Non-shielded - XLP Insulation - FAA L824 Type C

Download Spec Sheet
Brochure

5kV - Non-shielded - XLP Insulation - FAA L824 Type C

Non-shielded - XLPE Insulation
FAA L824 Type C - Airport Lighting Cable
5kV - Single Conductor

Construction
Category Conductor Description Annealed (soft) copper Class B stranding
Conductor Shield Extruded semi-conducting layer
Category Insulation Description Cross-linked Polyethylene (XLPE) Extruded concentrically over the conductor to the wall thickness
  • Suitable for use in dry locations at continuous conductor temperature of 90°C
  • May be installed in conduit, duct, or properly supported aerial installations
  • Suitable for airport lighting cable applications
  • Rated for wet location and direct burial
  • Suitable for all applications in which ICEA allows use of non-shielded cable at voltages of 2001 volts and above
  • FAA Specifications L-824, Type C; ICEA S-96-659; AC 150/5345-7F

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Stranding Insulation Thickness Outside Diameter Inches Material Weight (Lbs./M')
MVX10801 8 7 0.11 0.375 94
MVX10601 6 7 0.11 0.415 130
MVX10401 4 7 0.11 0.46 189

*Used as Airport Lighting Cable under FAA Regulation L824-C Note: The data shown are approximate and subject to standard industry and manufacturer tolerances