2.4kV - CCW Armored Power, Nonshielded, 3/C VFD Cable #CCXMV_1239

Zoom In Zoom Out Enlarge

*Product images are for illustrative purposes only and may differ from the actual product.

2.4kV - CCW Armored Power, Nonshielded, 3/C VFD

UL Type MC-HL or MV-90, EPR
90°C
Cable Tray Use, Sunlight-Resistant, Direct Burial, ABS CWCMC

Gauge

Construction Applications Q&A

Construction
Category Conductor Description	Bare annealed copper per ASTM B3 Compact stranding per ASTM B496
Extruded Strand Shield	Extruded thermoset semi-conductor stress control layer over conductor per ICEA S-96-659 and UL 1072
Category Insulation Description	90 mils Ethylene Propylene Rubber (EPR) per ICEA S-96-659 and UL 1072 Insulation is printed 1-Black, 2-Red, and 3-Blue for phase identification
Grounding Conductor	Three split Class B stranded bare annealed copper grounding conductors Sized in accordance with UL 1072 and NEC Table 250.122
Armor	Continuous, impervious, welded, corrugated aluminum armor
Category Jacket Description	Flame-retardant, moisture and sunlight resistant Polyvinyl Chloride (PVC), yellow Low temperature performance meets ASTM D746 brittleness temperature at or below 40°C

Variable Frequency Drives: 3-conductor CCW armored cables with 3 symmetrical grounding wire are the preferred wiring method for use with AC motors controlled by pulse-width modulated inverters in VFD applications
For use in feeders and branch circuits in industrial power distribution systems per NEC articles 328 and 330
Approved for Classes I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2, hazardous locations covered under NEC Articles 501, 502, and 503
Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced no more than 6 feet apart
Installed in both exposed and concealed work, wet or dry locations, directly buried or embedded in concrete

Name

Question

Note: The data shown are approximate and subject to standard industry and manufacturer tolerances