15kV - Type MV-105 - EPR Insulation - Shielded Cable #AIY3_1227

Zoom In Zoom Out Enlarge

*Product images are for illustrative purposes only and may differ from the actual product.

Download Spec Sheet

Brochure

15kV - AIA - UL Type MV-105/MC - Shielded

Aluminum Interlocked Armor
EPR Insulation - PVC Jacket
UL Type MV-105 or MC
15kV - 3-Conductor - Shielded

Gauge

Construction Applications Standards Q&A

Construction
Category Conductor Description	Bare copper Compact Class B strand
Conductor Shield	Extruded semi-conducting thermosetting stress contol layer
Category Insulation Description	Ethylene Polypropylene Rubber (EPR) 133% insulation level
Insulation Shield	5 mil copper tape with 25% overlap
Category Assembly Description	The insulated and shielded power conductors shall be cabled round with fillers and with a grounding conductor in one outer interstice and covered with a binder tape
Armor	A single strip of aluminum interlocked armor
Category Jacket Description	Red Polyvinyl Chloride (PVC) Flame, sunlight & moisture resistant

Installed in wet or dry locations, indoors or outdoors, in exposed or concealed work
May be used in cable trays or on approved support in protected areas
Permitted for use in Class I Division 2, Class II Division 2, and Class III Divisions 1 and 2 hazardous locations per the NEC

Name

Question

Note: The data shown are approximate and subect to standard industry and manufacturer tolerances