Multipair -Low Smoke- SPOS Cable

*Product images are for illustrative purposes only and may differ from the actual product.

XLPE-LSOH - Type TC-LS - SPOS

90°C, 600 Volt
XLPE-LSOH
Type TC-LS
SPOS
Method 1 Color Code

Construction
Category Conductor Description 16 or 18AWG tinned annealed copper per ASTM B33 Class B stranding per ASTM B8
Category Insulation Description Cross-Linked Polyethylene (XLPE), low smoke and flame retardant Color code per ICEA Method 1; pairs black and white with one conductor in each pair printed for alpha-numeric identification
Shield Pairs are individually shielded with aluminum/poly tape in contact with drain wire 100% coverage Overall shield is aluminum/poly in contact with drain wire Drains are stranded tinned copper
Category Jacket Description Low Smoke, Zero Halogen Polyolefin (LSZH PO), flame retardant and sunlight resistant
  • In free air, raceways, aerial or direct burial
  • In wet or dry locations
  • Permitted for use in Class 1 Division 2 industrial hazardous locations per NEC
  • UL 1277 Type TC-LS
  • UL 1581 UL 1685
  • IEEE 1202 available upon request
  • ROHS Compliant
  • OSHA acceptable
  • EPA 40 CFR, Part 261

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Pairs Insulation Thickness Jacket Thickness Outside Diameter Inches Material Weight (Lbs./M')
LZ41802 18 2 0.03 0.045 0.51 92
LZ41804 18 4 0.03 0.06 0.63 167
LZ41808 18 8 0.03 0.08 0.855 326
LZ41812 18 12 0.03 0.08 1.03 441
LZ41816 18 16 0.03 0.08 1.14 554
LZ41820 18 20 0.03 0.08 1.265 676
LZ41824 18 24 0.03 0.08 1.45 7995
LZ41836 18 36 0.03 0.01 1.65 1118
LZ41850 18 50 0.03 0.01 2.085 1616
LZ41602 16 2 0.03 0.06 0.585 130
LZ41604 16 4 0.03 0.06 0.675 204
LZ41606 16 6 0.03 0.06 0.8 301
LZ41608 16 8 0.03 0.08 0.915 394
LZ41612 16 12 0.03 0.08 1.11 548
LZ41616 16 16 0.03 0.08 1.35 713
LZ41620 16 20 0.03 0.08 1.365 850
LZ41624 16 24 0.03 0.08 1.57 1001
LZ41636 16 36 0.03 0.11 1.98 1548
LZ41650 16 50 0.03 0.11 2.165 2020

Note: dimensions and weights are nominal and subject to industry and manufacturer tolerances