Coaxial Cable Cable

*Product images are for illustrative purposes only and may differ from the actual product.

RG 59, RG 6, RG 11

RG 59, RG 6, RG 11

Construction
Conductor and Shield Material BC-Bare copper TC-tinned copper CCS-copper covered steel AL-Aluminum
Insulation Jacket FP-Foamed Polyethylene FEP-Foamed Fluorinated Ethylene Propylene PE-Polyethylene PVC-Polyvinyl Chloride OMNIPLEN-Proprietary Plenum Rated Insulation and Compound
  • 75 ohm Video Distribution
  • MATV/CATV Broadband Cables
  • UL, CM, CMR, CMP
  • CATV/MATV/CATV-P

Questions & Answers

Ask a Question

Part Number Table

Part # Type Gauge Dielectric Material Shield Material Coverage Nominal OD over Jacket Nom. Cap./Ft. Vel of Prop. Material Weight (Lbs./M')
E15901 CATV 20 FP .144" AL Foil % 40% AL Braid .234/PVC 16.2 0.82 23
E15905 DBur. 20 FP .144" AL Foil & 67% Braid .240/PE w/Floodant 16.2 0.82 28
E55905 CATV 20 FP .144" 95% Copper Braid .240/Riser/PVC 16.2 0.82 35
E55906 Dual 20 FP .144" AL Foil & 67% AL Braid .242 x .510 PVC 16.2 0.82 60
E85903 Plen. 20 FFEP .135" AL Foil & 95% TC Braid .204/Plen 16.0 0.82 24
E20601 CATV 18 FP .180" AL Foil & 60% AL Braid .272/PVC 16.2 0.82 31
E20604 Quad 18 FP .180" 2 AL Foils & 60%/40% AL .302/PVC 16.2 0.82 44
E20605 DBur. 18 FP .170" AL Foil & 60% AL Braid .272/PE w/floodant 16.2 0.82 24.25
E20606 Quad Plen. 18 FFEP .170" 2 AL Foils & 60%/40% AL .264/Plen. 16.0 0.84 38
E20607 Plen. 18 FFEP .170" AL Foil & 95% TC Braid .236/Plen 15.5 0.84 44
E20609 Dual 18 FP .170" AL Foil & 60% AL Braid .272 x .575 PVC 16.2 0.82 72
E20617 Plen. 18 FFEP .170" AL Foil & 60% AL Braid .239/PLEN 15.5 0.84 40
E31101 CATV 14 FP .280" AL Foil & 65% AL Braid .400/PVC 16.2 0.82 62
E31103 CATV 14 FP .280" AL Foil & 61% TC Braid .405/PVC 16.2 0.82 78
E31104 Quad 14 FP .280" 2 AL Foils & 60%/40% AL .405/PVC 16.0 0.84 78
E31105 DBur. 14 FFEP .280" AL Foil & 60% AL Braid .45/PVC w/floodant 16.2 0.82 46
E31108 Plen. 14 FFEP .280" AL Foil & 60% AL Braid .351/Plen. 16.0 0.82 79

Note: The data shown is approximate and subject to standard industry and manufacturer tolerances