20-1 Non-Shielded Stranded IMSA Cable Cable

*Product images are for illustrative purposes only and may differ from the actual product.

IMSA 20-1 Stranded

20-1 IMSA
600 Volt
Stranded

Construction
Category Conductor Description Stranded bare copper 7 strands
Category Insulation Description Polyethylene (PE)
Category Jacket Description Polyethylene (PE)
  • For use in signal systems, and approved for installation in underground ducts or as aerial cable supported by a messenger
  • Resistant to moisture, weather, and sunlight

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Conductors Jacket Thickness Nominal OD over Insulation Outside Diameter Inches Material Weight (Lbs./M')
IM20114107 14 10 0.06 .025 0.615 230
IM20114127 14 12 0.06 .025 0.65 275
IM20114167 14 16 0.06 .025 0.715 330
IM20114207 14 20 0.06 .025 0.75 440
IM20114257 14 25 0.06 .025 0.895 520
IM2011427 14 2 0.045 .025 0.35 70
IM2011437 14 3 0.045 .025 0.37 80
IM2011447 14 4 0.045 .025 0.4 100
IM2011457 14 5 0.045 .025 0.44 125
IM2011477 14 7 0.045 .025 0.475 160
IM2011497 14 9 0.06 .025 0.615 200
IM20112107 12 10 0.06 .030 0.745 325
IM20112127 12 12 0.06 .030 0.77 400
IM20112167 12 16 0.06 .030 0.875 490
IM20112207 12 20 0.08 .030 0.99 630
IM2011227 12 2 0.045 .030 0.405 90
IM2011237 12 3 0.045 .030 0.425 115
IM2011247 12 4 0.045 .030 0.47 151
IM2011257 12 5 0.045 .030 0.52 170
IM2011277 12 7 0.06 .030 0.59 240
IM2011297 12 9 0.06 .030 0.69 300
IM2011027 10 2 0.04 .025 0.43 120
IM2010827 8 2 0.045 .025 0.45 184
IM2010627 6 2 0.045 .025 0.48 205

Note: The data shown is approximate and subject to standard industry and manufacturer tolerances