19-1 Non-Shielded Solid IMSA Cable Cable

*Product images are for illustrative purposes only and may differ from the actual product.

IMSA 19-1 Solid

19 1 IMSA
600 Volt
Solid

Construction
Category Conductor Description Solid Bare copper
Category Insulation Description Polyethylene (PE)
Category Jacket Description Polyvinyl Chloride (PVC)
  • For use in signal systems, and approved for installation in underground ducts or as aerial cable supported by a messenger
  • Resistant to moisture, weather, and sunlight

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Conductors Jacket Thickness Nominal OD over Insulation Outside Diameter Inches Material Weight (Lbs./M')
IM1911410 14 10 0.06 .025 0.615 230
IM1911412 14 12 0.06 .025 0.61 255
IM1911416 14 16 0.06 .025 0.715 330
IM191142 14 2 0.045 .025 0.33 65
IM1911420 14 20 0.06 .025 0.75 440
IM1911425 14 25 0.06 .025 0.895 520
IM191143 14 3 0.045 .025 0.35 75
IM191144 14 4 0.045 .025 0.395 100
IM191145 14 5 0.045 .025 0.41 115
IM191147 14 7 0.045 .025 0.45 150
IM191149 14 9 0.045 .025 0.615 200
IM1911210 12 10 0.06 .030 0.7 325
IM1911212 12 12 0.06 .030 0.745 400
IM1911216 12 16 0.06 .030 0.875 490
IM191122 12 2 0.045 .030 0.405 90
IM1911220 12 20 0.08 .030 0.925 630
IM191123 12 3 0.045 .030 0.425 115
IM191124 12 4 0.045 .030 0.445 135
IM191125 12 5 0.045 .030 0.505 170
IM191127 12 7 0.06 .030 0.575 240
IM191129 12 9 0.06 .030 0.725 300
IM191102 10 2 0.04 .025 0.43 120
IM191082 8 2 0.045 .025 0.45 184

Note: The data shown is approximate and subject to standard industry and manufacturer tolerances