SHIELDED TRAY CABLE
VNTC®* - PVC Jacket
PVC/Nylon Insulation 90°C
600 Volt - UL Type TC
ER Rated
Download PDF

CONSTRUCTION
Conductor: - Stranded bare copper Class B per UL 62
Insulation: - Extruded polyvinyl chloride to UL requirements for Class TFN and TFFN insulation with nylon jacket is approved per UL 83
- Insulation Thickness: .015", Nylon Thickness: .004"
Shield: - 100% aluminum polyester with tinned copper drain wire
Assembly: - The conductors are cabled with fillers where needed to make a round compact core and a suitable tape (when required) is applied over the construction
Color Code Chart 107:
Cond. Num. Color Cond. Num. Color
1 Black 2 Red
3 Blue 4 Orange
5 Yellow 6 Brown
7 Red w/ Black Stripe 8 Blue w/ Black Stripe
9 Orange w/ Black Stripe 10 Yellow w/ Black Stripe
11 Brown w/ Black Stripe 12 Black w/ Red Stripe
13 Blue w/ Red Stripe 14 Orange w/ Red Stripe
15 Yellow w/ Red Stripe 16 Brown w/ Red Stripe
17 Black w/ Blue Stripe 18 Red w/ Blue Stripe
19 Orange w/ Blue Stripe 20 Yellow w/ Blue Stripe
21 Brown w/ Blue Stripe 22 Black w/ Orange Stripe
23 Red w/ Orange Stripe 24 Blue w/ Orange Stripe
25 Yellow w/ Orange Stripe 26 Brown w/ Orange Stripe
27 Black w/ Yellow Stripe 28 Red w/ Yellow Stripe
29 Blue w/ Yellow Stripe 30 Orange w/ Yellow Stripe
31 Brown w/ Yellow Stripe 32 Black w/ Brown Stripe
33 Red w/ Brown Stripe 34 Blue w/ Brown Stripe
35 Orange w/ Brown Stripe 36 Yellow w/ Brown Stripe
37 Black
Jacket: - Black sunlight resistant, flame retardant polyvinyl chloride per UL 1277 requirements for Type TC power and control cables
Applications:
- Control circuits for operation and interconnection of protective and signaling devices, and for general use in manufacturing, industrial, and commercial distribution systems
- UL listed and labeled for installation in ladders, trough, channels, solid bottom trays and other similar structures (NEC Articles 318 and 340), and in duct, conduit, wireways and all other installations approved for building wire
- In hazardous locations per NEC Articles 500 and 501. May be used in wet or dry locations, sunlight resistant, and suitable for direct burial
Standards:
- UL Type TC, 600 Volt
- NEC Type TFN conductors
- IEEE 1202 (70,000 BTU/hr)/CSA FT4
- IEEE 383 (70,000 BTU/hr)
- UL Subject 1277 (70,000 BTU/hr)
- OSHA Acceptable
Part # AWG Size No. of Cond. Nom. Jacket Thick. Nom. O.D. Lbs./M’ Recommended Fittings
A21802* 18 2 .045” .280” 40 TCF07540A
A21803 18 3 .045” .290” 49 TCF07540A
A21804 18 4 .045” .310” 58 TCF07540A
A21805 18 5 .045” .340” 70 TCF07540A
A21807 18 7 .045” .370” 89 TCF07540A
A21808 18 8 .045” .404” 105 TCF05054A
A21809 18 9 .045” .462” 121 TCF05054A
A21810 18 10 .045” .460” 127 TCF05054A
A21812 18 12 .045” .520” 160 TCF05054A
A21819 18 19 .060” .650” 245 TCF05067A
A21825 18 25 .060” .690” 270 TCF07578A
A21837 18 37 .060” .740” 365 TCF07578A
 

 
Site Designed By Triton Web Studios