SHIELDED TRAY CABLE
FREP®* - XHHW - 2 - (VW-1)
FR-EP Insulation - CPE Jacket
90°C - 600 Volt - UL Type TC
ER Rated
Download PDF

CONSTRUCTION
Assembly: - Conductors shall be cabled in concentric layers with interstices filled with suitable fillers where necessary.
- A binder tape of synthetic material assembles the core in a tight circular configuration.
Color Code Chart 107:
Cond. Num. Color Cond. Num. Color
1 Black 2 Red
3 Blue 4 Orange
Conductor: - Stranded soft drawn tinned copper, Class B.
Insulation: - Flame retardant ethylene propylene rubber meeting the requirements for EPR VW-1 per UL.
Shield: - Aluminum/polyester laminated shielding tape shall be applied helically over the conductors. Over the shield is a stranded tinned copper drain wire.
Jacket: - Black sunlight resistant thermoplastic Chlorinated Polyethylene (CPE)
Applications:
- Used as power and control cables in dry and wet locations
- Can be installed in cable trays, raceways, and open air.
- Suitable for exposure to weather, direct burial, and for Class 1 Division 2 hazardous locations as per NEC
Standards:
- UL Type TC 600 Volt
- UL Type XHHW-2, VW-1 Conductors
- ICEA S-82-552 - 600 Volt
- ICEA T-29-520 (210,000 BTU/hr.)
- IEEE 1202 (70,000 BTU/hr.)/CSA FT4
- IEEE 383 (70,000 BTU/hr.)
- UL Subject 1277 (70,000 BTU/hr)
Part # AWG Size No. of Cond. Nom. Jacket Thick Nom. O.D. Lbs./M’ Recommended Fitting
AF21802* 18   2   .045”   .300”   45   TCF05040A
AF21803 18   3   .045”   .316”   55   TCF05040A
AF21602 16   2   .045”   .324”   52   TCF05040A
AF21603 16   3   .045”   .342”   68   TCF05040A
AF21604 16   4   .045”   .480”   95   TCF05054A
 
PHILADELPHIA ATLANTA BOSTON CHICAGO DENVER HOUSTON LOS ANGELES SAN FRANCISCO ST. LOUIS TAMPA

 
Site Designed By Triton Web Studios